Shipping throughout Russia and to other countries

Calibration blocks Standard samples (CCA, SOP)

Industry Standard Samples (CCA) and Enterprise Standard Samples (SOP)
  • Designed to adjust the parameters of an ultrasonic flaw detector before conducting non-destructive testing of products.
  • The samples contain control reflectors - angular, flat-bottomed, cylindrical, etc.
  • According to the echo signals from them, the maximum sensitivity of the flaw detector, the control zone (ASD) is set, the time sensitivity adjustment (RF) is adjusted.
  • In the manufacture of SOP from low-carbon steels, an anticorrosive coating is applied, which increases the service life by 8-12 times. Most instructions indicate accuracy in the manufacture of notches - 0.01-0.05 mm. This means that rust is unacceptable.
  • SOP is made to order according to the instructions of ultrasonic inspection from plastics and various metals: low-carbon steels, stainless steels, titanium alloys, aluminum, etc.
  • SOP are supplied with passports, which indicate their characteristics and scope of application.
DOCUMENTATION

All products

The group "New Technologies" offers for review the products of the plant : devices for ultrasonic non-destructive testing, flaw detectors, thickness gauges, ultrasonic transducers, metrological equipment, standard samples for tuning, calibration of devices
  • Inclined separately-combined.
    Inclined separately-combined.
    Small-sized P122-5.0-XX-M, etc.
  • Accessories
    Accessories
    Membranes, power supply, etc.
  • Gels for ultrasound control
    Gels for ultrasound control
    Miass 110, 250
  • Cables for connecting the PEP
    Cables for connecting the PEP
    Combined, single, etc.
  • Specialized PEP
    Specialized PEP
    PA123-1,8-65, PB121-2,5-65-14 and others .
  • Flaw detector
    Flaw detector
    UD9812 Basic kits, etc.
  • Thickness gauge
    Thickness gauge
    UT907 Sets Standard, etc.
  • Ultrasonic module
    Ultrasonic module
    UDM901 for 2, 4 and 8 channels
  • PEP with changes. input angle
    PEP with changes. input angle
    P121-xx-0/90-xx, etc.
  • Immersion PEP
    Immersion PEP
    BNC P221-1,25-K20, 1,8-K20, etc.
  • PEP for railway objects
    PEP for railway objects
    P131, 121, 111-xx-Khx-RAILWAY, etc.
  • Inclined small-sized PEP
    Inclined small-sized PEP
    PEP P121 5.0-XX-8-M, 8.0-XX-5*4- M
  • Metrological equipment
    Metrological equipment
    Signal synthesizer SS306, etc.
  • Calibration blocks
    Calibration blocks
    Standard samples (CCA, SOP)
  • Direct combined PEP
    Direct combined PEP
    P111-1,25-K20, 1,8-K14*14, 2,5-K14 etc.
  • Straight lines separately-combined. PEP
    Straight lines separately-combined. PEP
    PEP P112-1,8-14*14, 2,5-14 et al .
  • Inclined standard PEP
    Inclined standard PEP
    P121 at frequencies of 1.8; 2.5; 5.0; 8.0 MHz
  • Inclined Ceramic PEP
    Inclined Ceramic PEP
    PEP P121 at 1.8; 2.5; 5.0 MHz

About

The company specializes in the development and production of devices for ultrasonic non-destructive testing.

  • IN VARIOUS INDUSTRIES

    UZK equipment is used for flaw detection of welds, conducting ultrasonic thickness measurement of pipes and pipelines, metal thickness measurement, metal delamination control, etc.

  • QUALITY CONTROL

    The company has an accredited metrological service, whose tasks include product control and verification of measuring instruments. All devices are certified in Rosstandart of the Russian Federation.

  • SOFTWARE DEVELOPMENT

    The company is a trusted publisher of software, COMODO and VERISIGN certificates.

Information Board

Learn more about our products.
  • Ultrasonic transducers for the flaw detector бренда
    Ultrasonic transducers for the flaw detector

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: